One of the most common telecommunications masts is the installation of a suspension mast. These masts are installed in three or four types and are restrained to the ground or support by means of a wire harness. These towers are installed in places where there is enough space. It is usually used in mobile phone, radio and wireless networks and computer networks.

These masts can be installed on the roofs of houses and offices, the height of the buildings contributes to the height of the place where the antennas are installed, and for this reason, it has many advantages in urban areas. If this mast is installed on the ground, it needs a lot of space to install the harness wire. Due to their light weight, the cost of these rigs is lower than other rigs, and their installation is easy and economical.

The most common applications of anchoring rigs can be mentioned in the following fields:

Installing microwave dishes or wireless antennas
Installation of mobile antennas
Installation of radio antennas
The advantages of using containment towers
High endurance
Easy to carry and install
Low weight and lightness
Economical and low-cost implementation and installation
Small volume and the ability to install at heights
The material of the mast
The parts used in the suspension masts consist of main bases, one-inch tubes.
The core material of each section used in the mast is 8 mm grade rebar.
16 grade German galvanized braces
The parts and length of the towing wire are calculated based on 9 meters of bracing.
The appearance of the mast is in the form of an equilateral triangle with lengths of 25, 35, 45 cm.
The material used in the rebars is steel and iron reinforcement.